Supreme Power
A Solar Maintenance Company
Moving from one location to another? We can remove your system safely from your existing home and reinstall it at the new destination hassle-free.
Moving and want to take your system with you?
Supreme Power gives a homeowner peace of mind when moving a system from one location to the next.
SOLAR SYSTEM REMOVAL PROCESS
STEP ONE:
Disconnecting The System:
A Trained technician will make sure that all electrical components are safely disconnected.
STEP TWO:
Removing All Electrical From Roof:
We proceed to remove all electrial both PV and AC from the roof and any conduit from the roof to the solar inverter.
STEP THREE:
Remove Panels From Roof:
All panels are taken off the rails and placed safely on the ground to avoid shattering or hair-line fractures.
STEP FOUR:
Remove Rails From Existing Roof:
We then remove all railings, nuts, bolts, flashing etc. from roof and caulk any holes left from the mounting screws.
Note: Once the system is removed, at the customer discretion, we can store the panels at the homeowners residence or take the panels to a secure location in our warehouse.
SOLAR SYSTEM REINSTALLATION PROCESS
Our customer care deptment will coordinate with the customer through the entire process.
STEP FIVE:
New Design Layout:
Our design team will provide a detailed layout of the new home illustrating where the panels will be placed in order to optimize the power of the sun.
STEP SIX:
Preparing The Roof:
The installation team will make sure the entire roof is feasible to install and will begin to reinstall all new flashing, nuts, bolts, and mounting screws.
STEP SEVEN:
Rails and Panels Install:
All rails and panels will be reinstalled according to the layout along with any optimizers or microinverters.
STEP EIGHT:
Reconnecting Electrical:
A solar deck(s) will be installed on roof along with electrical conduit that will be connected back to the Solar Inverter.
Trained Professionals With Exceptional Service
Our team of professional service technicians are licensed to install, remove and reinstall solar. After your solar system has been reinstalled, we will do a Quality Control Check to make sure the panels are mounted correctly, roof is free from debris, no torn shingles, gum paper will be checked to avoid roof leaks, electrial is tied in correctly from the roof, to the inverter, and back to the electrical service panel. Your service tech will leave you with a written report detailing production analysis and system performance.
REPAIRING ALL OR A PORTION OF YOUR ROOF
The same rules apply if you are moving your system from one place to another. But the only difference here is that if you are repairing a portion of your roof, we make sure a team member is there at the time of the roof repair to remove any solar equipment off the roof. This way we will allow the roof repair to go seamless without any delays. After the roof is fixed, we then perform the reinstallation of the system.
MOVING TO NEW LOCATION
Service Fee: Request a quote
Remove the system and any hardware from the roof
Remove any Electrial feeding the solar system
Securing remaining AC Power with Lockout/Tagout Clips
Reinstall the entire solar system on the new roof
Reconnect any electrical feeding the PV system
Connect remaining electrical to the service panel
Conduct a visual inspection/audit
Recommissioning the system
TEMPORARILY REMOVAL
Service Fee: Request a quote
Remove all or a portion of the panels for anticipated roof repair.
Store panels at customer's residence in a secure location for quick reinstallation
Once repair is made, we reinstall that portion or all of the system components back on the roof.
Connect remaining electrical to the PV system
Conduct a visual inspection/audit
Recommissioning the system
This website uses cookies to ensure you get the best experience on our website.